10″ Secondary Leather Protectors with Kevlar

Description

Made with a cut resistant liner made with Kevlar® fiber by DuPont™ throughout the entire glove for 360° protection The Flame Resistant 10" Cut Resistant Secondary Leather Protector is ergonomically designed to fit perfectly over Class 0 and 00 rubber insulating gloves per ASTM F496/ASTM F696. We use the highest quality goat grain leather along with an innovative glove pattern to create a leather protector with unrivaled fit and dexterity.  Available in sizes 7-12. This model features a lining made by Kevlar® fiber by DuPont™ throughout the entire glove and cuff to provide enhanced cut resistance, puncture resistance and flame resistance. We finish the glove with a FR Strap System to ensure that nothing on this protector will drip, melt or ignite if exposed to an arc flash. Arc Rated to 36 cal/cm.

• Cut resistant liner made with Kevlar® fiber by DuPont™ throughout the entire glove for 360° protection
• DuPont™, and Kevlar® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates
• Designed for use over Class 0 & 00 rubber insulating gloves per ASTM F696
• Will not drip, melt or ignite if exposed to sparks or flames
• Flame Resistant: exceeds standards according to ASTM F2302 and D6413
• Arc Rating: 36 cal/cm² according to ASTM F2675/F2675M-13
• Cut Resistant: ANSI/ISEA Level A3
• Puncture Resistant: ANSI/ISEA Level 4
• Compliant: NFPA 70e-2018 Standard / OSHA 29 CFR Part 1926
• Double stitched throughout with specialty Coats® thread
• Ergonomic, 3D pattern fits perfectly over rubber insulating gloves
• WARNING: Youngstown’s Leather Protectors do NOT protect against shock or voltage.